HUMMER H2 Reclining Kit Installation Instruction Manual

In this book include how to Install HUMMER H2 Reclining Kit , with a fairly clear explanation about HUMMER H2 Reclining Kit Installation Instruction Manual. Please download this HUMMER H2 Reclining Kit Installation Instruction Manual to get a more complete explanation.

HUMMER H2 Reclining Kit Installation Instruction Manual preview:

For maintenance
Apply grease to the moving parts periodically. (Be sure to apply grease whenever you
find that the operation cannot be made smoothly.)
This product is made of galvanized steel. Clean this product when it becomes
tarnished to prevent it from rusting. Do NOT clean this product with chemicals etc.

HUMMER H2 Reclining Kit Installation procedure
1. Raise the seat, and then remove the three plastic covers (black) on both sides and the
middle side by prying them with the flat-blade screwdriver etc.
The nuts (silver, 4 pieces) appear where the covers are removed.
2. Remove the nuts with the 18 mm socket wrench.
* The left and right seat frames are combined at the middle position. It is
recommended to remove the nut beforehand.
3. Remove the connector for the seat heater.
Connection at the
middle position
Plastic cover
Seat frame
mounting nut
Plastic cover
Seat frame
4. Fold the seat back forward, and then remove the carpet board.
5. Remove the four nuts fixing the seat frames.
This enables you to remove the seat and seat back with the frames.
Seat back
Seat
Luggage room
Carpet board
Seat frame
mounting nut

Download HUMMER H2 Reclining Kit Installation Instruction Manual.Pdf

Related posts:

Tags: back seat,  General Motors,  Hummer,  hummer h2,  installation instruction,  seat frame,